Assembly

GroomRest Assembly Video

Follow the step-by-step video below to assemble your GroomRest. Assembly takes just a few minutes.

Written Assembly Instructions:

1. Place the GroomRest platform upside down on a soft flat surface.
2. Insert one adjustable leg into each mounting bracket.
3. Align the hole in the adjustable leg with the hole in the mounting bracket.
4. Insert the mounting pin through the aligned holes in the bracket and leg.
5. Hand-tighten the locking screw onto the end of the mounting pin until snug. Do not overtighten.
6. After all 5 adjustable legs are attached, adjust the height by pressing the push-button pin and sliding the leg up or down until it locks into the desired hole. Make sure all 5 legs are set to the same height before use.
7. If the push button is difficult to press with your finger, use the eraser end of a pencil to depress it.